Summary:Take the universal seat belt as an example, let's take a look at the basic structure of the seat belt: 5 loops: waist loop, leg loop, climbing loop (c...
Take the universal seat belt as an example, let's take a look at the basic structure of the seat belt: 5 loops: waist loop, leg loop, climbing loop (connecting loop in the picture), protection loop, equipment loop, adjustment buckle.
wearing seat belt
1. Make sure the webbing is smooth and not twisted, and the webbing is loosened to the maximum.
2. One end of the protection ring is in front of the seat belt. Hold the waist ring and distinguish the left and right leg rings.
3. Put on the seat belt like wearing pants, put the waist loop above the crotch, and put all clothing in the seat belt.
4. Tighten the waist ring first, so that it can be inserted into the palm smoothly, and it is advisable that the fist cannot come out.
5. Tighten the leg loops
6. Reverse the single-buckle seat belt, and tighten the double-buckle seat belt to ensure the rear end (~8cm).
7. Arrange the webbing
English
Español
Deutsch
